Bitumen 30-40 Supplier and Exporter

Iran bitumen penetration grade 30-40 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 30-40 is most used bitumen grade and basic material for all other bituminous products.

Softening point and penetration of bitumen 30-40

Penetration grade bitumen supplied by Iran Bitumen Co. is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by Iran Bitumen Co. is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 30-40 has penetration between 30~40 desi-millimeter and softening point between 52 ~ 60C. The penetration grade bitumen 30-40 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 30/40 has very strong viscosity compare to other grades.

Guaranty/warranty of Bitumen 30-40 Supplier and Exporter

Iran Bitumen Co. guaranty the quality of bitumen 30-40 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. Iran Bitumen Co. bitumen quality is as per ASTM/EN 12591.

Specification of penetration bitumen 30/40

Bitumen 30/40

Specification Test method
Penetration @ 25 c

30/40

D.5

Softening point c

55/63 D.36

Ductility @25 c

100 Min D.113

Loss on heating(wt) %

0.2 Max D.6

Flash point c

250 Min D.92
Solubility in CS2(wt) % 99.05 Min D.4

Drop in penetration after heating %

20 Max D.5
Density @25 c 1.01/1.06 D.70/D.3289

Spot test

negative

A.A.S.H.O.T102